Stainless Steel: ASTM A 403 
Grade: WPS/WPW 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H

Carbon Steel: ASTM A 234 
Grade:. WPB/WPBW, (IBR/Non IBR) 

Alloy Steel: ASTM A 234, Gr. WP1, WP11, WP22, WP5, WP9, WP91, (IBR/Non IBR)

Nickel Alloys:
Grade: 
Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201),
Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500),
Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825),
Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625),
Inconel 601 (UNS No. N06601),
Hastelloy C 276 (UNS No. N10276),
Alloy 20 (UNS No. N08020),
Titanium (Grade I & II)

Duplex Steel
Grade: 2205 (UNS No. S31803), 2207 (UNS No. S32760)

Copper Alloys: 
Aluminium, Copper, Brass & Gunmetal
UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500
UNS No. C 70600 (Cu -Ni- 90/10), C 71500 (Cu -Ni- 70/30)

Types : Elbow, Tee, Reducer, Return Bends, Stub-Ends, Cap, Colla, Cross, Insert, etc.

Size : 1/8"NB TO 48"NB. (seamless & welded)

Wall thickness : sch. 5s to sch.xxs

ELBOW 90oLR	ELBOW 90oSR	ELBOW 45oLR
MATERIAL : 304/304L , 316/316L THICKNESS: SCH10S , SCH 40S SIZE : 90o LR 1/2"~24" 90o SR 1"~6" 45o LR 1/2"~24"
EQUAL-TEE	RED-TEE
MATERIAL : 304/304L , 316/316L THICKNESS: SCH10S , SCH 40S SIZE : Equal Tee 1/2"~12" Reducing Tee 3/4"x1/2"~12"x8"
CON-RED	ECC-RED	ECC-RED
MATERIAL : 304/304L , 316/316L THICKNESS: SCH10S , SCH 40S SIZE : CONCENTRIC REDUCER 3/4"x1/2"~12"x8" ECCENTRIC REDUCER 3/4"x1/2"~12"x8"
	CAP
MATERIAL : 304/304L , 316/316L THICKNESS: SCH10S , SCH 40S SIZE : 1/2"~12"